Starting - Uponor BT Série Guide D'utilisation

- Now you can check the RF distance, go to the room which must be
regulated. Put your thermostat on the final position (On the wall or
table...), then put the thermostat in Comfort mode (setting temperature
position 37°C). Close the door and go to the receiver to check if the new
status of the thermostat has received. (The heating is generally showed by
a Red LED).
- Now return to the thermostat and switch off it. Check on the receiver again
if it's also switched off (The red LED must be turned off)
o If the RF signals were received correctly, adjust your setting temperature
as you want.
o If the RF signals weren't received correctly, check the installation
(Receiver position, distance...)
* To make the installation easier it will be better to have the thermostat near
to the receiver during the configuration mode. (A minimal distance of >
1 meter must be respected)

2.4 Starting

The thermostat is now ready to works.
The default working mode will be automatic
program "P1".
Monday to Friday
20°C
18°C
07:00 09:00
Saturday & Sunday
20°C
18°C
08:00
WIRELESS THERMOSTAT USER GUIDE
17:00 23:00
23:00
with a standard built-in
8