Parameter's Menu - Uponor BT Série Guide D'utilisation

Parameter's menu

5
Your thermostat has a parameter's menu, in order to enter in this menu,
press and maintain the edition key ( ) during 5sec. Then parameter menu
will appear and first parameter screen will be displayed:
Now you can select a parameter which must be adjusted with the navigation
keys (◄) or (►), once the parameter chosen, toggle the value with the
(OK) key, modify it with (-) or (+) and confirm your adjustment with (OK).
To leave the parameter menu, choose the parameter « End » and press
(OK).
N°
00 RF INI: Radio configuration
Sends the radio link signal in order to assign this RF Thermostat with
it's RF receiver.
You also need to set simultaneously the receiver in radio
configuration mode (On a simple receiver press and maintain button
until the green light lit's up, see receiver leaflet)
01 dEG: Unit of the temperatures displayed
°C Celsius
°F Fahrenheit
02 __:__ Selection of the Time clock unit
24H (24:00)
12H (12:00 AM /PM)
03 dst: Daylight Summer time change Summer<->Winter
YES automatic change according to date.
no no daylight summer time automatic change.
04 AirC: Calibration of the internal probe
The calibration must be done after 1 day working with the same
setting temperature in accordance with the following description:
Put a thermometer in the room at 1.5M distance from the floor (like
the thermostat) and check the real temperature in the room after 1
hour.
When you enter on the calibration parameter "no" is displayed on the
right to indicate no calibration has made.
WIRELESS THERMOSTAT USER GUIDE
Default value & other possibilities
17