LaserLiner SensoMaster 400 Mode D'emploi page 26

SensoMaster 400
SECONDARY SWITCH FUNCTIONS
5. Brightness of LED display:
Pressing the Units and Volume switches
together enables the selection of LED's ON
Bright, ON Dim, or OFF. Press together to
cycle the selection. The LED's will display the
current level of brightness selected as the
switches are pressed. The LED light bulb
symbol on the LCD will also change to
display the selected setting.
6. Menu:
Pressing the Accuracy and Volume switches together enables entry into the Menu
functions.
- 6a In the Menu mode, the up arrow (Accuracy switch) scrolls the menu up.
- 6b In the Menu mode, the down arrow (Volume switch) scrolls the menu down.
- 6c In the Menu mode, the enter arrow (Units switch) enters or selects the
available options.
7. Capture (HOLD):
Allows a reading to be recorded.
Note:
Units, Volume, Accuracy and LED Brightness are stored in memory and will be retained
when the unit is turned off or when batteries are replaced.
26
7
6c
ENGLISH ENGLISH
6a
6
6b
5