Table des Matières
Publicité
Safety instructions for chargers
Product description and
specifications
Intended use
The glue pen is intended for solvent-free gluing of, for exam-
ple, paper, cardboard, cork, wood, leather, textiles, foam
materials, plastic (except PE, PP, PTFE, Styrofoam® and
plasticised PVC), ceramics, porcelain, glass and stone.
It is suitable for sticking, repairing, decorating and making
models.
The glue pen is not suitable for gluing objects which can be
exposed to temperatures of 50 °C and above.
Product features
The numbering of the product features refers to the diagram
of the glue pen on the graphics page.
1 609 92A 3XZ | (9.3.18)
Gluey_innen_160992A3XZ_001.indd 12
Gluey_innen_160992A3XZ_001.indd 12
12 | English
Do not leave the glue pen unattended while it is
switched on.
Do not touch the hot nozzle or the silicone cap. There is
a risk of burns.
Have your glue pen and charging station serviced only
by a qualified repair person using only original
replacement parts. This will ensure that the safety of the
product is maintained.
Place the glue pen down in a safe place after use and
let it cool down completely before packing it away.
The hot nozzle can cause damage.
Keep the glue stick out of reach of children under
8 years old. Swallowing the glue stick poses a choking
hazard.
Keep your work area well-ventilated. The gas and
steam produced during work are often harmful to one's
health.
Wear protective glasses while working overhead.
Do not throw the glue stick into fire.
The battery contacts must not be short-circuited.
Do not expose the charger to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
Charge only NiMH batteries. The battery voltage must
match the battery charging voltage of the charger.
Otherwise there is a danger of fire and explosion.
Keep the charger clean. Dirt poses a risk of electric
shock.
Do not operate the charger on an easily ignited sur-
face (e.g. paper, textiles, etc.) or in a flammable envi-
ronment. There is a risk of fire due to the charger heating
up during operation.
Do not charge hot batteries.
(1) Nozzle
(2) Silicone cap
A)
(3) Glue stick
Bosch Power Tools
09.03.2018 12:52:22
09.03.2018 12:52:22
Publicité
Table des Matières
