1.1 UNPACKING
Remove all the protective packing
pieces.
Check
characteristics on the nameplate and be
sure to comply with them (1.1.1).
Note
the
service
references shown on this plate in the
boxes below for future reference.
Service:
1. 2 BUILDING INTO A BASE UNIT
Check that the air intakes and outlets are
free of obstruction. Comply with the
information
concerning
dimensions (in millimetres) of the base
unit destined to receive the hob.
- Fitting into the worktop
See diagrams (1.2.1 - 1.2.3)
- Fitting flush with the worktop
See diagram (1.2.2)
the
appliance's
and
standard
Type:
the
fitting
1.1.1
1.2.1
64
1.2.2
64
1.2.3
7
R 3
10
25
R 3