Publicité
Lectores/Readers/Lecteurs/Näherungsleser
Lectores/Readers/Lecteurs/Näherungsleser
In this operating mode the reader is connected to a door controller (Class II/
EN
III). This provides the system with anti-sabotage security by not incorporating
the lock-release or the output button on the reader itself. These functions are
compatible with the door controller. It can also be connected as a secondary
reader to a MDS/ADS/BUS-2 display module.
The coding is done via the SW2 switch. On launching the reader in the
following mode:
- Wiegand-26, the «+» led will light up for 1 second.
- Data/Clock, the «-» led will light up for 1 second.
In addition, an ADS type keypad can be connected to the CN3 connector to
provide more secure access controls which combine a 4 digit pin code and a
card.
In this operating mode the cards are activated on the chosen central unit,
therefore capacity will depend on this.
Once activated, you can use them to open the relevant access door. To this
end, it is simply necessary to swipe (momentarily approximate) the card/keyfob
to the proximity reader.
As it operates on a radio frequency, no physical contact is necessary, meaning
you can even swipe the card without taking it out of your wallet. The maximum
reading distance is cm. With proximity keyfobs reading distance is 4cm.
The proximity reader has various light indicators, the meaning of which is
the following:
1
2
Lectores/Readers/Lecteurs/Näherungsleser
Lectores/Readers/Lecteurs/Näherungsleser
In this operating mode the reader is connected to a door controller (Class II/
EN
III). This provides the system with anti-sabotage security by not incorporating
the lock-release or the output button on the reader itself. These functions are
compatible with the door controller. It can also be connected as a secondary
reader to a MDS/ADS/BUS-2 display module.
The coding is done via the SW2 switch. On launching the reader in the
following mode:
- Wiegand-26, the «+» led will light up for 1 second.
- Data/Clock, the «-» led will light up for 1 second.
In addition, an ADS type keypad can be connected to the CN3 connector to
provide more secure access controls which combine a 4 digit pin code and a
card.
In this operating mode the cards are activated on the chosen central unit,
therefore capacity will depend on this.
Once activated, you can use them to open the relevant access door. To this
end, it is simply necessary to swipe (momentarily approximate) the card/keyfob
to the proximity reader.
As it operates on a radio frequency, no physical contact is necessary, meaning
you can even swipe the card without taking it out of your wallet. The maximum
reading distance is cm. With proximity keyfobs reading distance is 4cm.
The proximity reader has various light indicators, the meaning of which is
the following:
1
2
3
+
+
-
-
3
+
+
-
-
1. No Power.
2. Standby Mode. Door Closed.
3. Door Open.
1. No Power.
2. Standby Mode. Door Closed.
3. Door Open
.
Pag 21
Pag 21
Publicité
