Beta 1947H Notice D'utilisation Et Instructions page 9

PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR PERFORMING
MAINTENANCE JOBS
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE OPERATING
PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
Additional personal protective equipment to wear according to the values found in the environmental hygiene/risk analysis survey if
the values exceed the limits under current regulations.
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS
WEAR PROTECTIVE HELMET
TECHNICAL DATA
AIR INLET
MAXIMUM PRESSURE
MINIMUM INTERNAL HOSE SIZE (Ø)
MEAN AIR CONSUMPTION
WEIGHT
TUBE LENGTH
OVERALL LENGTH
SOUND PRESSURE LEVEL
VIBRATION LEVEL
KEY TO SYMBOLS
a: air inlet 1/4" GAS
b: cartridge ring nut
c: handle
d: gun trigger
e: pressure regulating knob
f: oil lubrication
1/4" GAS
10 bars
2.5 mm
120 l/min
0.75 kg
210 mm
260 mm
85 dB(A) (EN ISO 15744)
2
<2.5 m/s (ISO 28927-2)