Climadiff CLIMA17 Notice D'utilisation page 38

8. TROUBLE SHOOTING
You can solve many common air conditioner problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
Appliance doesn't work
Cooling function (« COOL » mode) of the
appliance is not efficient
Appliance seems to make too much noise
« E1 » error code
« E2 » error code
« E4 » error code
« FL » error code
NOTE: all pictures in the manual are for explanation only. The actual shape of the device you purchased
may be slightly different, but the operations and functions are the same.
PROBLEM POSSIBLE CAUSE

Not plugged in

The appliance is turned off

The circuit breaker tripped or a blown fuse

(« TIMER »
Timer
corrected set

Water full alarm is on

Check if nothing is blocking air inlet/outlet

Make sure that there is no heat source in the
room

Strainers are too dirty and covered by dust

Set temperature is not appropriate

Fan speed set in not the correct one

Make sure that you have correctly removed
all packing material

Make sure that the air conditioner is stable
and level

Make sure that the surface on which your
appliance is perfectly flat

There is abnormal sense of coil pipe sensor

There is abnormal
temperature sensor

The cooling system is in anti-frost protection

The air conditioner is in water full alarm state
mode) hasn't been
sense of room
38