Installation Instructions - Climadiff CLIMA17 Notice D'utilisation

The nameplate attached to the inside or rear of the appliance (depending on the model) includes the entire
information specific to your appliance.
We recommend that you make a note of its serial number in this booklet prior to installation, so that you
can refer to it later (technical work, request for assistance, etc.).
CAUTION: no assistance can be provided without this information.

4. INSTALLATION INSTRUCTIONS

Select mounted place
Always place and use the appliance on a dry, level, flat and level surface. Leave at least 50 cm of
clearance behind and on both sides of the appliance and leave at least 50 cm of free space above the
appliance before connection of exhaust pipe.
Assembly method of exhaust pipe
 Connect exhaust pipe assembly with round joint (Fig. 1a). To do this, please unfold part of the exhaust
pipe air. Then position the round joint face to the extremity of the exhaust hose. Finally, screw the round
joint to the end of the exhaust pipe until it is securely fastened. It is important to screw the round joint
starting from the extremity of the hose (Fig. 1b).
 Fix this round joint to the air outlet of the air conditioner (Fig. 2).
 Connect the oblate joint of the connected exhaust pipe assembly with sealplate of window.
 Install sealplate on the nearest window. No obstacles at a distance of 50cm around the window should
be ensured to guarantee unimpeded air exhaust.
30