Display; Displays During Operation; Loading The Batteries - Denon DVM-1805 Mode D'emploi

DISPLAY

Stays on when the
A-B repeat function
is on.
Stays on when the
repeat function is on.
Lights up when the
inserted disc comes
to a pause.
Stays on when the
inserted disc is being
played back.
Displays how long a current title or track has been played
back. When a chapter or track has switched, the number
of a new title, chapter or track is displayed.
DISPLAYS DURING
OPERATION
Lights up when a DVD
is inserted on the tray.
1
2
3
4
5
Lights up when a
CD is inserted on
the tray.
The playing disc
number flashes on.
Power on
No disc inserted
Tray open
Tray closed
Loading the Disc
Power off
Tray rotation
AC cord plugged in

LOADING THE BATTERIES

1. Open the battery compartment cover.
2. Insert two AA batteries, with each one oriented cor-
rectly.
3. Close the cover.
Cautions On Batteries
• Use "AA" (R6P) batteries in this remote control
unit.
• Replace the batteries with new ones approximately
once a year, though this depends on the frequency
with which the remote control unit is used.
• If the remote control unit does not operate from
close to the main unit, replace the batteries with
new ones, even if less then a year has passed.
• The included battery is only for verifying operation.
Replace it with a new battery as soon as possible.
• When inserting the batteries, be careful to do so in
the proper direction, following the
in the remote control unit's battery compartment.
• To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose
of batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
– 11 –
and marks