Troubleshooting - EUROCOM X7200 Panther 2.0 Guide Utilisateur

Concise User's Guide

Troubleshooting

Problem
The Wireless LAN/
Bluetooth modules cannot
be detected.
The Bluetooth module is off
after resuming from Sleep.
The Wireless LAN indicators
show that the
WLAN module is powered on,
however the module does not
connect.
The captured video files from
the PC Camera are taking up
too much disk space.
No sound can be heard
through an HDMI connected
display device.
28 - Troubleshooting
The modules are off. Check the appropriate touch sensor indicator to see if the modules are
on or off (see ). If the LED indicator is not illuminated, then press the appropriate touch sensor
instant key/function key combination in order to enable the modules.
The Bluetooth module's default state will be off after resuming from the Sleep power-saving
state. Use the key combination (Fn + F12) or touch sensor instant key
Bluetooth module after the computer resumes from Sleep.
The WLAN module is turned off in the Windows Mobility Center. The computer's wireless
function keys will not function properly if Wireless is turned OFF in the Windows Mobility Center
control panel. Make sure that Wireless is ON in the Windows Mobility Center to ensure proper
function key behavior.
Note that capturing high resolution video files requires a substantial amount of disk space for
each file. See Reducing Video File Size on page
You have not configured the HDMI audio output. See
Possible Cause - Solution
23.
HDMI Ports on page
to power on the
16.