EUROCOM X7200 Panther 2.0 Guide Utilisateur page 12

6. Press Enter and select (if applicable) the Strip Size (best set
to default).
7. Press Enter and select the Capacity size (best set to default).
8. Press Enter to select Create Volume.
9. Press Enter to create the volume, and confirm the selection
by pressing Y.
10. This will now return to the main menu.
Figure 3 - RAID Created
11. Select 5.Exit and press Enter, then press Y to exit the RAID
configuration menu.
12. Make sure the Windows 7 OS DVD is in the DVD drive. and
as the computer starts up it will automatically boot from the
Windows 7 OS DVD.
13. Click Next to continue installing the operating system as
normal (see your Windows documentation if you need help
on installing the Windows OS).
14. Install the Windows drivers as per
Concise User's Guide
Table 5 on page 19.
RAID Setup - 7