Vermeiren Eclips X4 KIDS Mode D'emploi page 18

Some of the wheelchairs Eclips X4 kids Aktief are made with an adjustable axle adjuster.
With these adjuster you can also change the seat height.
1
* Rear wheel:
1.
Remove the rear wheels (see § 2.12).
2. Loosen the fixing screws Ⓐ from the
rear axle block Ⓑ.
3. Push the axle block Ⓑ upwards or
downwards to the desired height (steps
from 15 mm).
4. Tighten the screws Ⓐ properly.
5. Mount the rear wheels.
6. Adjust the brakes according § 3.9.
It is also possible to rotate the rear axle
block Ⓑ (2 positions: steps from 15 mm).
1. Remove the screws  and .
2. Push/Pull the adjustable axle adjuster 
upwards or downwards to the required
height.
2
3. Retighten the screws  and .
3
Page 16
Eclips X4 kids
2016-01