Philips HD3720 Mode D'emploi page 21

Masquer les pouces Voir aussi pour HD3720:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 74
Problem
Appliance general
It is not possible to
close the doors.
There is frost on
the keg or on the
appliance.
Beer leaks out of the
appliance.
The appliance makes a
sound.
The pump goes on
frequently when I am
not pouring beer.
Solution
Make sure you push down the blue locking levers until they
are in horizontal position before you close the doors.
Make sure the tube is placed correctly in the tap unit and the
tap handle is in upright position. See chapter 'Preparing for
use' , section 'Placing the tube into the tap unit' .
Make sure the tap unit is placed correctly on the keg.
Unplug the appliance and let the keg or appliance defrost.
Dry the appliance or keg with a cloth.
Make sure that the doors are properly closed. For instructions
on how to close the doors, see the chapter 'Preparing for use' ,
section 'Placing the keg into the appliance' . It is normal for
some frost to be present on the back of the keg.
Make sure that the tap unit and the tube are placed correctly
(see chapter 'Preparing for use' , sections 'Placing the tap unit
onto the keg' and 'Placing the tube into the tap unit').
Remove the tap unit and tube and reinstall them. If the
problem continues to occur, contact the PerfectDraft call
centre in your country to obtain a new tube.
Because the appliance chills constantly, the fan works
continuously.
The pump may go on while you pour beer to maintain the
right pressure. When you are not pouring beer, the pump also
goes on every now and then to keep the appliance at the
right pressure.
If the appliance makes a hissing sound, the tap unit may not
be properly connected to the keg. Make sure you rinse the
tap unit thoroughly. It is essential that all rubber parts of the
tap unit are moist before you assemble the tap unit onto the
keg.
Reinstall the tap unit and the keg by following the instructions
in sections 'Placing the tap unit onto the keg' and 'Placing the
keg into the appliance' in chapter 'Preparing for use' . If this
does not help, try another keg together with a new tube. If
the problem continues to occur, contact the PerfectDraft call
centre in your country.
ENGLISH
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hd3610

Table des Matières