How To Pour A Perfect Beer - Philips HD3720 Mode D'emploi

ENGLISH
16
- Red or green dash with flashing yellow-orange background
light = the tap unit and/or tube are not properly placed.
Remove the keg and check if the tap unit and the tube are
properly placed. See chapter 'Preparing for use' , sections
'Placing the tap unit onto the keg' and 'Placing the tube into
the tap unit' . If this does not help, try another keg with a new
tube.
LED indicator lights (HD3610 only)
-
There are three indicator lights on top of the appliance that
show the status of the appliance.
-
Red indicator light = the appliance is switched on and you
have to install a keg.
- Orange indicator light = the appliance is cooling the keg and
the keg has not yet reached the right drinking temperature.
- Green indicator light = the beer has reached the right
drinking temperature and is ready to be poured.
Other indications
- Red indicator light flashes = the tap unit and/or tube are not
properly placed.

How to pour a perfect beer

Follow the instructions below to pour a perfect beer.
Cleaning beer glasses
Always use clean beer glasses when you tap beer.
1 Clean the glasses carefully in hot water with some
washing-up liquid.
2 Rinse the glasses thoroughly with cold tap water.
In this way you remove all grease and soap residues, which
allows you to pour a beer with a good head.
3 Hold the glasses upside down to the light to check if they
are free of grease and soap residues.
The glasses are clean when the water runs down the surface
evenly, without revealing any stains.
Tip: If you clean beer glasses in the dishwasher, do not use a
rinse agent. Rinse agent residues may break down the foam
head of the beer.
Pouring beer
1 You get the best results if you pour the beer in a cool, clean
and wet glass!
Note: A cool glass ensures a more stable beer head. It also
keeps freshly poured beer fresh longer and helps to retain its
sparkling quality.