Philips HD3720 Mode D'emploi page 13

Masquer les pouces Voir aussi pour HD3720:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 74
Level indication
The yellow-orange level indication on the display shows the
amount of beer left in the keg in eight steps.
Note: If you use 20cl glasses, you can pour approx. 30 glasses
of beer from one keg. If you use 33cl glasses, you can pour
approx. 18 glasses.
Freshness indication
The freshness indication tells you how long the beer is still
fresh.
-
When you place a new keg in the appliance, the freshness
indication shows that the beer in the keg stays fresh for
30 days. The indication counts down from 30 to 0 days.
-
Once the keg has been opened, the beer stays fresh for
30 days if the keg is stored in the appliance.
Make sure the appliance is switched on all the time.
-
When 30 days have passed, the display shows that the keg
needs to be replaced. A dash and an exclamation mark
appear on the display.
Adapting the freshness indication
-
If you want to switch off the appliance for a longer period
(e.g. a holiday), store the opened keg in the fridge.
Disconnect the tap unit, rinse the top of the keg, rinse the
tube and store the tube with the keg in the fridge.
Always write down the date and the number of days that the
beer inside the keg is still fresh on the keg (see number of days
on the display).
-
When you reinstall the opened keg, you can set the
freshness indicator to the correct number of days with the –
and + buttons.
Tip: To calculate the correct number of days: compare the
date with the one you have written on the keg and subtract
the number of days the keg lay in the fridge from the number
you wrote on the keg when you stored it.
Before you reinstall the opened keg, clean the tap unit and the
tube again. Also check if dirty deposits have developed on top
of the keg. If so, do not use the opened keg but use a new one.
Other indications
Besides the beer level and temperature, the display gives the
following information:
-
Green dash with no level indication visible = the tap unit is
not present on the keg.
-
Red dash with no level indication visible = no keg is
installed.
ENGLISH
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hd3610

Table des Matières