Denon Professional DN-700CB Guide D'utilisation page 16

Serial Remote Control
In addition to the included Remote Control, you can use an external "host device" (e.g. a computer) to
control DN-700CB.
When the host is connected to DN-700CB, it controls the unit by sending serial "commands." The unit and
host can be connected through the Remote Input.
To begin using Serial Remote Control with DN-700CB:
1. If the unit is off, press the Power button to power it on.
2. Use an RS-232C straight cable to connect the Remote Input (9-Pin D-Sub connector) to the
corresponding input on your computer or other host device.
3. On your computer or other host device, use a third-party program to enter serial commands that can
operate DN-700CB's various controls.
To learn exactly which commands to use for DN-700CB, visit the DN-700CB product page at
denonpro.com. Then click the Downloads tab and select Serial Command Protocol Guide from the
menu.
Web Interface Control
You can also use a web interface to manage DN-700CB from any device that has a web browser
(computer, tablet, smartphone, etc.).
To control DN-700CB through the web interface:
1. If the unit is off, press the Power button to power it on.
2. Use a standard ethernet cable to connect the Ethernet Port to a working router. When the unit and
router are connected, DN-700CB's IP address will show on the Display. If no router is connected, the
Display will show the IP address as http://000.000.000.000.
3. Open the web browser on the device that you would like to use to control the unit.
Note: Your device must be connected to the same router as DN-700CB.
4. Type DN-700CB's IP address into your browser's search tab and then hit enter. Your web browser will
direct you to the webpage from which you can control DN-700CB.
Important: In order to make changes in the web interface, first click the lock icon at the top of the page.
You will need to enter the Administrative password to unlock the page to make changes. The default
Admin password is adminpwd. Once you have finished editing, you can lock the page again to prevent
further changes.
16