Disposal - Spa Cartrend 50241 Mode D'emploi

assembling the hydraulic jack
1. swivel the T-handle (1) up into a vertical position.
2. Insert the hydraulic jack with the locking pin (21) into the handle socket from the bot-
tom, at an angle.
3. Tighten the safety bolt (26) all the way to secure the locking pin.
4. screw the hydraulic jack to the frame plate using the two screws (17) (use the locking
washers and washers (15, 16)!).
storage
Clean the motorcycle lift and apply a light oil film to any bare metal parts. Push the release
pedal so the lifting arm lowers to the lowest position. Then store the motorcycle lift in a dry
and clean environment. Be sure to secure the motorcycle lift from rolling off!
service
should you have any questions regarding commissioning or operating in spite of studying
these operating instructions, or if a problem should occur against all expectations, please
get in contact with your specialist supplier.

DIsPosaL

Make sure that sewage systems and groundwater are not exposed to the lubricants.
Do not dispose of the packaging or this product with household rubbish. The product and
the packaging are made of recyclable materials (plastics, metal, paper, lubricants).
When the product is no longer usable, dispose of it in an environmentally friendly manner
in accordance with local regulations.
D
GB Instructions for use
25
25