note: Verify the load is correctly seated when the car jack begins to raise the vehicle.
4. secure the vehicle with lashing straps (not included).
5. raise the vehicle until the latch (3) locks into the desi-
red locking pin (2). The hoisting cradle is now secured
from accidentally lowering.
6. Press slightly down on the release pedal (18) so the
latch gently moves toward the locking pin.
Lower vehicle
1. slightly raise the hoisting cradle with the hoisting pedal (19) and pull back on the bar (6).
2. Pull back on the bar (6) to release the locking pin until it catches in the bar retainer (11).
3. Carefully and slowly press the release pedal (18) to gently lower the hoisting cradle.
TeChnICaL DaTa
Lifting Capacity
Lift height min./max.
Locking positions
Dimensions (with T-handle) l x w x h
Weight
ambient temperature
TroUBLeshooTInG
Problem
oil leak.
Motorcycle lift
isn't working.
Motorcycle lift isn't raising
properly.
22
22
max. 680 kg
11.8 cm to 36.8 cm
20 cm, 28 cm and 33 cm
110 cm x 37 cm x 85 cm
26,8 kg
-20 °C to +55 °C
Cause
Bleed valve open.
air in the system.
remedy
screw the bleed valve all the way
in.
Check oil level.
Bleed hydraulic system.
Motorcycle Lift