Getting Started - Horizon Fitness T82 Manuel Du Propriétaire

T82 DISPLAYS
DISTANCE
ENTFERNUNG
INCLINE .
TIME STEP
STEIGUNG
ZEIT SCHRITTE
CALORIES
KALORIEN
DISPLAY WINDOWS
• TIME: Shown as minutes : seconds. View the time
remaining or the time elapsed in your workout.
• DISTANCE: Shown as km or miles. Indicates distance
traveled or distance remaining during your workout.
• SPEED: Shown as MPH or KMPH. Indicates how fast
your walking or running surface is moving.
• CALORIES: Total calories burned or calories
remaining left to burn during your workout.
• HEART RATE: Shown as BPM (beats per minute).
Used to monitor your heart rate (displayed when
contact is made with both pulse grips).
12
SPEED
GESCHWINDIGKEIT
HEART RATE
HERZFREQUENZ
ENERGYSAVER
ENERGIESPARMODUS
• INCLINE: Shown as percent. Indicates the incline of your
walking or running surface.
• STEPS: (Use on 10K Steps program only). To display the
steps remained in your workout.

GETTING STARTED

1) Check to make sure no objects are placed on the belt that
will hinder the movement of the treadmill.
2) Plug in the power cord and turn the treadmill ON.
3) Stand on the side rails of the treadmill.
4) Attach the safety key clip to part of your clothing making
sure that it is secure and will not become detached during
operation.
5) Insert the safety key into the safety keyhole in the console.
6) You have two options to start your workout:
A) QUICK START UP
Simply press the START key to begin working out.
Time, distance, and calories will all count up from zero. OR...
B) SELECT A PROGRAM
1) Select program by pressing the DIRECT BUTTON or using
ARROW key, press ENTER to confirm setting.
2) If needed, select level by pressing UP and DOWN
ARROW KEY, press ENTER to confirm.
3) When setup is complete, press START to begin your
workout.
TO CLEAR SELECTION/RESET
THE CONSOLE
Hold STOP key for 3 seconds.
FINISHING YOUR WORKOUT
When your workout is complete, the treadmill
will stop and beep. You can turn off the
machine or it will enter Energy Saver Mode
in 15 mins.
13