Getting Started - Horizon Fitness ADVENTURE 3 Guide D'utilisation

Masquer les pouces Voir aussi pour ADVENTURE 3:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SET UP XID ACCOUNT FOR VIA FIT CONNECTIVITY
Creating an xID account will allow you to save and share workout data online at www.ViaFitness.com
Up to four users can be saved on a machine. This process is the first step in connecting your equipment. It must be done
from a computer, tablet, or mobile device that is connected to the internet.
1) Visit the web site: www.ViaFitness.com
2) Once at the web site, select the CONNECT YOUR EQUIPMENT option on the top menu bar.
3) The first step in connecting your equipment will to be creating your xID account. This will be your login to Via Fit.
4) Enter your phone number or another easy-to-remember 10-14 digit number. This will be your account number.
5) Fill in your profile information to finish the xID account set up process. You will be asked to provide an email address
not associated with any other xID account. Check your email after the set-up process for a link to validate your
account.
CONNECT WI-FI
Once you have created your xID account, you will be able to move on to activating the Wi-Fi on your equipment. Reminder,
this requires you to use your computer, tablet, or mobile device that is connected to the internet.
1) Press and hold
for 3-5 seconds until you see the message ACTIVATED on your screen.
2) On your computer or other device, go to your Wi-Fi settings. You should select the network with your model name.
Doing this enables you to connect your equipment to your wireless network.
3) A new window will pop up with the list of wireless networks your equipment can see. Select your home Wi-Fi network
and connect.
4) The remaining step is to reconnect your computer or other device back to your Wi-Fi network. Go to your settings again
and connect as you normally would.
Congratulations! You are now connected and ready to get started.
10
HZ14_OG_Adventure_3_5_Rev1_1.indd 10-11

GETTING STARTED

1) Check to make sure no objects are placed on the belt that will hinder the movement of the treadmill.
2) Plug in the power cord and turn the treadmill ON.
3) Stand on the side rails of the treadmill.
4) Attach the safety key clip to part of your clothing making sure that it is secure and will not become detached during
operation. Insert the safety key into the safety keyhole in the console.
5) Select your xID account, User, Guest, or Edit a User using
6) When you log in for the first time as User 1-4, you will be prompted to enter your xID information.
a) Enter your xID account number using
and press ENTER to select the numbers. Press ENTER after each
input to move to the next digit. After the final input, press ENTER.
b) Enter your passcode using
to select the numbers. Press ENTER after each input to move to the next digit.
After the final input, press ENTER twice.
c) If you key the incorrect number at any point while entering your xID or passcode, press and hold ENTER for 3-5
seconds to clear the selection and begin again.
A) QUICK START
Simply press START to begin working out. Time will count up from 0:00.
The speed will default to 0.5 MPH. Incline will default to 0%.
B) SELECT A PROGRAM
1) Select a PROGRAM using
and press ENTER.
2) Set workout program information using
and press ENTER after each selection.
3) Press START to begin workout.
NOTE: You can adjust the speed and incline levels during your workout.
C) FINISHING YOUR WORKOUT
When your workout is complete, your workout information will stay displayed on the console for 30 seconds and then
is automatically saved to the user profile if xID Terms and Conditions were accepted.
TO CLEAR CURRENT SELECTION
To clear the current program selection or screen, press and hold STOP for 3 seconds.
and press ENTER.
7/31/14 8:56 AM
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Adventure 5

Table des Matières