Abbreviations And Units; Key; Warranty; Important Notes - Franke HWTE100 Notice De Montage Et De Mise En Service

1.

Abbreviations and Units

DN
RCD
EA-Nr.
FAR-Best.-Nr.
Conversion
All length specifications in the graphics are in mm.
2.

Key

Warning!
Failure to observe can result in injury or even death.
Caution!
Failure to observe can result in material damage.
☞
Important!
Failure to observe can cause the product to malfunction.
☞
Useful information for optimally handling the product.
3.

Warranty

Liability is accepted according to the General Terms and Conditions of Business and
Supply.
Use original replacement parts only!
4.

Important Notes

• Installation, commissioning and maintenance are to be performed only by a
qualified technician according to legal regulations provided.
• All technical connection regulations specified by the local water and electricity
supply utility companies must be complied with.
• The installation is to be performed in compliance with local conditions, relevant
regulations (e.g.: VDE 0100), nationally applicable accident prevention
regulations (e.g.: VBG 4) and the acknowledged rules of technology.
• All work must be carried out in a de-energised state.
• All rights reserved to make technical alterations.
4
Nominal diameter in mm
Residual Current Protective Device,
Earth leakage circuit breaker
European Article Number
Franke Aquarotter Order Number
1 mm = 0.03937 inches
1 inch = 25.4 mm