Yamaha F40A Manuel D'utilisation page 146

2) Remove the oil drain plug 1.
NOTE:
The oil drain plug is magnetic. Remove all
metal particles from the plug before rein-
w
stalling it.
3) Remove the oil level plug 2 to allow
q
cC
000565
Inspect the used oil after it has been
drained. If the oil is milky, water is get-
ting into the gear-case which can cause
gear damage. Consult a Yamaha dealer
for repair of the lower unit seals.
NOTE:
For disposal of used oil consult your
Yamaha dealer.
4) With the outboard motor in an verti-
w
Gear oil grade/capacity:
q
Refer to SPECIFICATIONS on page 4-1.
5) When the oil begins to flow out of the
000566
6) Insert and tighten the oil drain plug.
4-19
the oil to drain completely.
cal position, using a flexible or pres-
surized filling device, inject the gear
oil into the oil drain plug hole.
oil level plug hole, insert and tighten
the oil level plug.
GB