Connecting The System - Pioneer AVG-VDP1 Manuel D'installation

Connecting the Units

Connecting the system

Guide speaker
(e.g. CD-TS37GP)
(sold separately)
RCA cable
(sold separately)
5
5 m (16
ft. 5 in.)
Black
To video input
Video recorder with
RCA input jack
(sold separately)
This unit's guide speaker output terminal is used in
the following condition:
When the multi-channel processor and the display
unit that does not have a speaker output terminal is
connected to this unit.
This unit
GPS antenna
6 m (19 ft. 8 in.)
26 pin cable
Note:
• In the following cases, images may not be dis-
played properly on the display/VCR:
- When not displaying the V. D. P. image out-
put from this unit on the front display.
- When connecting the display/VCR which
has incompatible video output format with
this unit's VIDEO OUT.
For more details, refer to the operation manual.
Yellow
Display unit
(sold separately)