Changing Over The Door Hinges; Fitting The Wall Spacer; Aligning The Appliance - Siemens iQ500 KS36WBI3P Notice De Montage

en
Attaching spacers
Fig. "
1. On the right side of the refrigerator
degrease the adhesive areas with
petroleum ether or spirit.
2. Stick spacers in all four corners at
a distance of 5 cm from the side
edges to ensure a minimum gap
between the appliances.
Note
You can purchase a connection set from
your dealer.
Changing over
the door hinges
The door hinges cannot be changed
over on this appliance.

Fitting the wall spacer

Fig. #
If available:
Fit wall spacers to obtain the indicated
energy rating of the appliance.
A reduced wall gap will not restrict
the function of the appliance. The energy
rating may then increase slightly.
Distance to the back wall
The distance of 75 mm must not be
exceeded.
8

Aligning the appliance

Place the appliance in the designated
location and align. The appliance must
be level. If the floor is uneven, use
the front height-adjustable feet. Adjust
the height-adjustable feet with a wrench.
Note
The appliance must be upright. Please
align it with a spirit level.
SW 22