Input Connectors On The Plasma Display With Video Card; Connection To Input1 And Input5 - Pioneer PDA-5003 Mode D'emploi

I When using PDA-5003
Input connectors on the Plasma
Display with video card
Consult the following chart when making connections to a
Plasma Display equipped with this video card (pages 7 to
16).
Input
Connector INPUT
Connected
*1
1
component
and signals
AV component
Analog RGB
Component video
S video
Composite video
Digital RGB
Personal computer
(PC)
*2
Analog RGB
S video
Composite video
Digital RGB
*1 Although INPUT1 and INPUT5 are compatible with various
kinds of signals, setup using the on-screen menu is
necessary after connections are made in order match the
characteristics of the source component (pages 18 to 21).
*2 INPUT1 is compatible with Microsoft's Plug & Play (VESA
DDC 1/2B).
*3 Depending on the video output board of the computer, this
type of connection may not be possible.
*4 INPUT2 is compatible with Microsoft's Plug & Play (VESA
DDC 2B).
I When using PDA-5004

Input connectors on the Plasma Display with video card

Consult the following chart when making connections to a Plasma Display equipped with this video card (pages 7 to 16).
Input
Connector INPUT
Connected
*1
1
component
and signals
AV component
Analog RGB
Component video
S video
Composite video
Digital RGB
Personal computer (PC)
*2
Analog RGB
S video
Composite video
Digital RGB
INPUT INPUT INPUT INPUT
*1
2 3 4 5
*3
*3
*4
INPUT INPUT INPUT INPUT
*1
2 3 4 5
*3
*3
*4
Installation and Connections

Connection to INPUT1 and INPUT5

Various components can be connected to the INPUT1 and
INPUT5 jacks. After connections are made, on-screen
setup is necessary to match the characteristics of the
connected component. Please see pages 18 to 21 for on-
screen setup after connection.
INPUT5
[ON SYNC]
jack
G
Output source
Video component/
personal
G ON SYNC
computer (PC)
with RGB output
G
G
Video component
with component
Y
video output
: Do not connect anything.
Note
Components compatible with INPUT1 are also compatible with
INPUT5. When making connections to INPUT1, please refer to
the Plasma Display's Operating Instructions.
See Appendixes 1 and 2 (pages 47 to 49) for
information regarding signals and display formats
supported by INPUT1 and INPUT5.
*1 Although INPUT1 and INPUT5 are compatible with various
kinds of signals, setup using the on-screen menu is
necessary after connections are made in order match the
characteristics of the source component (pages 18 to 21).
*2 INPUT1 is compatible with Microsoft's Plug & Play (VESA
DDC 1/2B).
*3 Depending on the video output board of the computer, this
type of connection may not be possible.
*4 INPUT2 is compatible with Microsoft's Plug & Play (VESA
DDC 2B).
[H/V SYNC]
B R HD VD
B R
B R H/V SYNC
B R HD VD
P /C P /C
B B R R
: Connect to this jack.
7
En