Replacing The Heating Elements And Protective Pipe - Stiebel Eltron SHO AC 600 7,5 Utilisation Et Installation

INSTALLATION
Maintenance
15.5 Replacing the heating elements and protective
pipe
f Install the electrically insulated heating element and protec- f
tive pipes into the flange plate.
Material losses
!
The corrosion protection resistor must not be damaged
or removed during maintenance work.
3 heating elements
1
1 Corrosion protection resistor (390 Ω)
6 heating elements
1
1 Corrosion protection resistor (390 Ω)
f Connect the heating element to the cylinder via the corrosion f
protection resistor.
The corrosion resistor acts to balance the potential and prevents
power leakage corrosion on the heating elements.
www.stiebel-eltron.com
1
2
3
1 Protective pipes
2 Heating element
3 Flange plate
SHO AC | 25