Cleaning And Maintenance - DeLonghi CTM2023 Mode D'emploi

Masquer les pouces Voir aussi pour CTM2023:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
A1-223IDL
8-10-2003
11:23
USE OF THE COMMANDS
This appliance is used as if there were two distinct
units.
• Make sure that the lever (A) is raised and the
dial (C) is set for a medium toasting level.
• Connect the appliance to the electrical outlet. In
order to eliminate the "new" smell at the first
use, operate the appliance without any food
inside for at least 5 minutes. Aerate the room
during this operation.
• Insert the slices of bread into the bread toasting
slots (H) and lower the lever (A) until it is all the
way down.
Note: If the appliance is not connected to the
electrical outlet, the lever will not go all the way
down.
• When the toasting is finished, the lever returns
to the up position, raising the toasted bread sli-
ces at the same time.
• If the bread is not sufficiently toasted, select a
darker degree of toasting by turning the dial
(C). If it is too dark, select a lesser degree of
toasting.
• The toasting can be interrupted at any time by sim-
ply pressing the stop/clear button (E).
Defrost function
You may toast slices of frozen bread by pressing the
defrost button (D) immediately after having lowered
the lever (A); the cooking cycle will be lengthened
in order to achieve the desired toasting level. The
red warning light will remain lighted while the
defrost function is in use.
Using the Reheat Button:
Press down control lever and press the reheat but-
ton (F). The reheat light will remain on whilst the
reheat function is in use. Please note that this is a
fixed reheat time which cannot be adjusted by the
browning control.
Pagina 7
SUGGESTIONS
• Never use the appliance when it is empty (when
• Do not use very thin or broken slices of bread.
• Do not insert other foods that may drip during
• Do not insert (by force) foods that are too big for
• Do not insert forks or other utensils into the

CLEANING AND MAINTENANCE

• Any cleaning and/or maintenance operation
• Let the appliance cool down before proceeding
• The external part of the appliance must be clea-
• DO NOT IMMERSE IN WATER.
• After each use, remove the plug from the elec-
• If a toast slice should become lodged in the toa-
• NEVER TOUCH ANY PART OF THE TOASTER
there is no bread inserted).
the cooking process. In addition to making the
cleaning procedure more difficult, these may
cause fires. It is also very important to clean the
crumb collection tray of any drippings before
each use.
the slots.
toaster in order to remove bread, in so far as it
may damage the resistance coils of the applian-
ce. Remove the plug from the outlet and turn the
appliance over, gently shaking it to remove the
lodged item.
must be done after having removed the plug
from the electrical outlet.
with its cleaning.
ned with soft cloth. Do not use abrasive deter-
gents which could ruin the surface.
trical outlet and empty the crumb collection tray
which is situated under the appliance.
ster, unplug the appliance, turn it upside down,
and shake the toaster gently.
WITH SHARP UTENSILS, ESPECIALLY INSIDE
THE BREAD TOASTING SLOTS.
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ctm4023

Table des Matières