Connection Of The Devices; Operation; Danger Of Fire - EuroLite LED PANEL RD Controller DMX Mode D'emploi

Connection of the devices

OPERATION

When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
Connect the connection-cable ends with the respective sockets of the LED panels and the controller.
Connect the panels to the mains with the power-plug.
With the POWER-switch, you can switch the panels on and off.
Connect the controller to the mains with the power unit.
You can select the programs by pressing the buttons on the controller.

DANGER OF FIRE!

15/35 51930570_V_1_0.DOC