JB Systems CMX 24 Mode D'emploi page 10

13. ACTIVATE A PROGRAM WITH A REGULAR BEAT
1) Press Audio. The audio led must be off.
2) Press the Park key and select MIX mode (Led on).
3) Select a program.
4) Adjust the Speed slider or press twice on Tap Sync to
define the beat.
5) Press Rec Speed and the desired Flash key.
The program will run with the programmed beat.
14. ACTIVATE A PROGRAM WITH THE SPEED SLIDER
1) Press Audio. The audio led must be off.
2) Press the Park key and select MIX mode (Led on).
3) Select a program.
4) Move the Speed slider to Show mode position.
5) Press Rec Speed and the desired Flash key.
Example: Run Scene program n°14 with a speed of 1 step per
second and adjust it so it can be controlled with the Speed slider.
1) Press Mode Select and select Chase//Scenes (Led).
2) Press Audio (Led off).
3) Press the Park key and select the MIX mode (Led).
4) Move all sliders to minimum position.
5) Move Master B to maximum position.
6) Select Page 1 (Page 2 Led).
7) Move slider of channel 14 to maximum position.
8) Adjust the Speed slider until 1:00 appears on the display and
the Speed led lights up.
9) Press Rec Speed and Flash 14. Release both keys. Scene pro-
gram 14 is adjusted to 1 step per second.
10) Move the Speed slider to Show mode position. Press Rec Speed
and Flash 14. Scene program 14 is ready to be
the Speed slider. Move the Speed slider until 0.10 appears on
the display. Program 14 will run with 10 steps per second.
15. SPEED
A. Slowest Speed (5 min.)
1) Press the Record key and hold it.
2) Press 3 times on the 5th Flash key, release Record.
3) The 5 minutes Led lights up.
CMX 24
controlled by
10