Step 5 - Test Your Setup Using The; Diagnostics Mode - AEI Security & Communications DigiSender XD Mode D'emploi

(EN) ENGLISH
DGXDSDV111 - DigiSender® XD - Single Input Digital Wireless AV Sender System
Installing your DigiSender® XD
Step 5 - Test your Setup Using the Diagnostics Mode
Your DigiSender® XD is set to Diagnostics Mode by default and will aid you in getting the best possible
picture and help identify any problems that may arise during installation.
1.
Switch on the source equipment (Satellite, Free-
view, DVD, VCR, etc.).
3.
Turn on the receiving TV, and select the SCART
channel assigned to the SCART socket that you
plugged the Receiver in to. This may be labelled as
SCART, AUX, AV, VIDEO, VCR or
Page 08
2.
Turn on the Transmitter by pushing the Power but-
ton on the front of the unit. The Power Indicator will
change from Red to Green to indicate that the unit
is switched on.
4.
Turn on the Receiver by pushing the Power button
on the front of the unit. The Power Indicator will
change from Red to Green to indicate that the unit
is switched on
.
Please read the instructions carefully prior to installation