Step 3 - Install The Ir Systeme Technik - AEI Security & Communications DigiSender XD Mode D'emploi

(EN) ENGLISH
DGXDSDV111 - DigiSender® XD - Single Input Digital Wireless AV Sender System
Installing your DigiSender® XD
Step 3 - Install the IR Systeme Technik Remote Relay Kit™
The IR Systeme Technik™ Remote Relay Kit includes various accessories that will help you in setting it
up the Remote Relay system correctly.
Once set up, this Remote Relay system will enable you to control your source equipment (your satellite
receiver for example), with its remote control, from the receiving location.
Example 1: Mount the IR Emitter vertically using
accessories 1 and 2. Ensure the LED is facing the IR
sensor on your source equipment.
Page 06
Accessory #1
Accessory #2
Example 2: Mount the IR Emitter horizontally using
the supplied sticky pad. Ensure the LED is facing the
IR sensor on your source equipment.
Please read the instructions carefully prior to installation
Extension Pieces
IR Emitter