Using Your Digisender® Xd; Standard Operation - AEI Security & Communications DigiSender XD Mode D'emploi

DGXDSDV111 - DigiSender® XD - Single Input Digital Wireless AV Sender System
Using your DigiSender® XD

Standard Operation

1.
Switch on the source equipment (Satellite, Free-
view, DVD, VCR, etc.).
3.
Turn on the receiving TV, and select the SCART
channel assigned to the SCART socket that you
plugged the Receiver in to. This may be labelled as
SCART, AUX, AV, VIDEO, VCR or
Please read the instructions carefully prior to installation
2.
Turn on the Transmitter by pushing the Power but-
ton on the front of the unit. The Power Indicator will
change from Red to Green to indicate that the unit
is switched on.
4.
Turn on the Receiver by pushing the Power button
on the front of the unit. The Power Indicator will
change from Red to Green to indicate that the unit
is switched on
.
ENGLISH (EN)
Page 11