Protecting The Environment; Technical Data; Ec Declaration Of Conformity - Black & Decker BES700 Mode D'emploi

Problem Possible Cause
Saw blade
damaged.
Saw blade
loosened.
Saw vibrates
or shakes
Saw not properly
fastened down.
Work piece not
properly supported.
Z

Protecting the environment

Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com

Technical data

Voltage
Speed
Blade outer diameter
Bore diameter
Weight
Blade thickness
Blade max. kerf
Mitre (max. positions)
Bevel (max. positions)
Max. cross-cut capacity at 90 °
Max mitre capacity at 45 °
Max. dept cut at 90 °
Max. dept cut at 45 °
BES700 - Level of sound pressure according to EN 62841:
L (sound pressure) 97.5 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 108.0 dB(A), Uncertainty (K) 3 dB(A)
WA
BES710 - Level of sound pressure according to EN 62841:
L (sound pressure) 96.0 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 107.5 dB(A), Uncertainty (K) 3 dB(A)
WA
Solution
Replace blade.
Tighten arbor bolt.
Fasten saw to bench, stand or table.
Properly support or clamp work
piece.
BES700 BES710
Type 1 Type 1
V 230 230
/min 4800 5000
mm 216 254
mm 30 30
kg 12.1 14.9
mm 1.8 1.8
mm 2.8 2.8
° +/- 47 +/- 47
° 47 47
mm 305 305
mm 203 203
mm 70 90
mm 35 40
(Original instructions)
%

EC declaration of conformity

MACHINERY DIRECTIVE
BES700, BES710 Sliding Compound Mitre Saw
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN62841-1:2015, EN62841-3-9:2015+A11:2017
These products also comply with Directive
2006/42/EC, 2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Black & Decker.
Black & Decker Europe, 210 Bath Road, Slough,
Guarantee
Black & Decker is confident of the quality of its products and
offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with Black & Decker Terms and Conditions and you will need
to submit proof of purchase to the seller or an authorised re-
pair agent. Terms and conditions of the Black & Decker 2 year
guarantee and the location of your nearest authorised repair
agent can be obtained on the Internet at www.2helpU.com, or
by contacting your local Black & Decker office at the address
indicated in this manual.
Please visit our website www.blackanddecker.co.uk to register
your new BLACK+DECKER product and receive updates on
new products and special offers.
ENGLISH
A. P. Smith
Technical Director
Berkshire, SL1 3YD
United Kingdom
01/03/2019
17