ABUS Security-Center EYSEO TV7300 Instructions D'installation page 42

This submenu applies to APERTURE mode:
Program the camera as follows:
APERTURE MENU
APERTURE
RETURN
1. Move the cursor to select APERTURE and while looking at the monitor or oscilloscope, use
the LEFT/RIGHT keys to select a value for the horizontal fine tuning. (00-15)
Note: The higher the value, the clearer the picture.
01
This submenu applies to GAMMA mode:
Program the camera as follows:
GAMMA MENU
Y GAMMA
RETURN
1. Y GAMMA: The values represent different correction factors.
VALUE
01
04
07
Notes on setting: If you use a conventional tube monitor, you should work with a
gamma correction factor of 0.45, for TFT monitors with a gamma
correction factor of 1.
42
04
Gamma correction
factor
0,9
0,45
0,1