Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
This menu applies to AUTO-IRIS mode:
Program the camera as follows:
AUTO IRIS MENU
IRIS LEVEL
FLICKERLESS
RETURN
1.
Move the cursor to select "IRIS LEVEL" and change the settings with the LEFT/RIGHT keys.
The higher the value, the further the auto-iris lens opens. This makes the image brighter.
2.
Move the cursor to select "FLICKERLESS". Shutter time: 1/120 (PAL), 1/100 (NTSC) and
AGC 0-36dB. Use this mode to compensate influences of fluorescent lighting at 100Hz.
However, it is not needed in Europe and should therefore be set to "OFF".
05
OFF
This menu applies to the ME mode:
Program the camera as follows:
ME MENU
SHUTTER
GAIN
RETURN
1.
Select SHUTTER with the cursor and set an exposure time using the RIGHT/LEFT keys.
2.
Select GAIN with the cursor and set a fixed value for increasing the video signal.
3.
No back-light compensation is possible in this mode.
4.
After completing your input, select "RETURN" with the cursor and then press ENTER
38
1/50SEC
0dB
Publicité
Chapitres
Table des Matières
