Caractéristiques Techniques; Technische Daten; Technical Specifications - TESA Hexagon RS232 Mode D'emploi

Mesureur électronique d'alésages
Table des Matières

Publicité

Chaque commande doit être terminée par le
code ASCII <CR>
?
Demande la valeur affichée
ID?
Demande l'identification du produit:
TE MICMASTER
VER?
Demande la version du programme
UNI?
Demande l'unité sélectionnée,
mm ou in
mm
Unité de travail mm
in
Unité de travail in
21. Caractéristiques techniques
– Résolution: 0.001 mm / 0.00005 in
– Affichage LCD grand format, digits de 7 mm
de hauteur
– Précision selon: Norme DIN 863-T1
– Alimentation: 1 pile lithium 3V, type CR 2032
– Autonomie 1 à 2 ans
– Température de travail: + 10 °C à + 40 °C
– Température de stockage: – 10 °C à + 60 °C
– Humidité relative:
valeur limite de fonctionnement: 80 %
– Compatibilité électromagnétique:
EN 50081-1 – EN 50082-1
– Degré de protection
(CEI 529, DIN 40 050): IP54
– Si la butée est connecté à un système SPC
par son câble de liaison RS232, le degré de
protection devient IP40.
20
Jeder Befehl muss mit dem ASCII-Code
<CR> abgeschlossen werden.
?
Angezeigten Wert anzeigen
ID?
Identifikation des Produktes anzeigen:
TE MICMASTER
VER?
Programmversion anzeigen
UNI?
Gewählte Maßeinheit anzeigen,
mm oder in
mm
Maßeinheit mm
in
Maßeinheit in

21. Technische Daten

– Ziffernschrittwert: 0.001 mm / 0.00005 in
– Große LCD-Anzeige, Ziffernhöhe 7 mm
– Genauigkeit: Nach Norm DIN 863-T1
– Stromversorgung: 1 Lithium-Batterie 3 V,
Typ CR 2032
– Betriebsdauer: 1 bis 2 Jahre
– Arbeitstemperaturbereich: + 10 °C bis + 40 °C
– Lagertemperaturbereich: – 10 °C bis + 60 °C
– Relative Luftfeuchtigkeit: Betriebsgrenzwert
80 %
– Elektromagnetische Verträglichkeit:
EN 50081-1 –EN 50082-1
– Schutzart (IEC 529, DIN 40 050): IP54
– Wird die EinbauMessschraube mittels Digital-
ausgang an ein Peripheriegerät angeschlossen,
ist der Schutzgrad IP40.
Each command has to end with the ASCII
code for <CR>
?
Request display value
ID?
Request product identification:
TE MICMASTER
VER?
Request programme version
UNI?
Request selected unit (mm or inch)
mm
Unit of measurement mm
in
Unit of measurement inch

21. Technical specifications

– Resolution: 0.001 mm / 0.00005 in
– Large LCD screen, 7 mm high digits
– Accuracy according to DIN 863-T1 standard
– Power supply: 1 type CR 2032 3V lithium cell
– Battery life: 1 to 2 years
– Working temperature range: + 10 °C to + 40 °C
– Storage temperature range: – 10 °C to + 60 °C
– Relative humidity:
maximum operating level = 80 %
– Electromagnetic compatibility:
EN 50081-1 – EN 50082 -1
– Degree of protection: (IEC 529, DIN 40 050):
IP54
– If the electromic head is connected to an SPC
system by its RS 232 connection cable, the
degree of protection will be IP40.

Publicité

Table des Matières
loading

Table des Matières