Publicité
Les langues disponibles
Les langues disponibles
G Operating instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Keep these operating
instructions in a safe place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
• This symbol is used to indicate safety
instructions or to draw your attention to
specific hazards and risks.
Note
• This symbol is used to indicate additional
information or important notes.
2. Extent of Delivery
• USB Type-C 3.1 / USB 3.0 Card Reader
3. Safety Instructions
• The product is intended for private, non-
commercial use only.
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Do not use the product in the immediate vicinity
of heaters or other heat sources or in direct
sunlight.
• Do not drop the product and do not expose it to
any major shocks.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Do not open the device or continue to operate it
if it becomes damaged.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
• Keep this product, as all electrical products, out
of the reach of children!
2
4. System Requirements
Note
• Never use the USB Type A and USB Type-C
plug at the same time.
The Card Reader supports the following operating
systems:
• Windows 10 / 8 / 7 / Vista / XP
• Mac OS X 10.6 or higher
5. Product Features
The product supports the following memory cards:
• SD / SDHC / SDXC
• microSD / microSDHC / microSDXC
USB specification:
• USB 3.1 Gen. 1
6. Getting started and Operating
Note – Compatibility USB 2.0 and USB 1.1
• The USB 3.1 / USB 3.0 Card Reader is
backwards compatible to USB 2.0 and USB
1.1.
• No additional drivers are needed. The
installation runs automatically.
• Plug your memory card into the slot of the Card
Reader.
• Connect the USB 3.1 / USB 3.0 Card Reader to
an available USB port on your end device. You
can now run the data transfer between your end
device and the memory card.
Note – USB 3.1 / USB 3.0
• For running the Card Reader with USB 3.1 /
USB 3.0, your computer must have a USB 3.1
/ USB 3.0 interface and an accurate installed
USB 3.1 / USB 3.0 driver.
• The installation runs automatically too.
Publicité
