Télécharger Imprimer la page

Babboe Big Guide De Montage page 4

Masquer les pouces Voir aussi pour Big:

Publicité

Les langues disponibles

Les langues disponibles

EN | Rain Tent Babboe Big - Manual for mounting
Congratulations on your new rain tent for your Babboe Big cargo bike!
Below you will find the instruction manual for the rain tent.
To dismount the tent, follow the steps in the reverse order.
Step 1
Mounting the poles to the box
Mounting the poles to the box is simple, however, it should happen in the following order:
1.
First, place the poles at the side of the handlebar
(with green sticker BACK). Insert the poles in the
slots at the corners of the box right up to wider
section of the poles
2.
Then assemble the cross piece in the inserted
poles
3.
Place the poles for the front (with red sticker
FRONT) in the cross piece
4.
Finally, place the front poles in the designated
slots
Step 2
Attaching the canvas
The order of assembly is essential for an optimum fit:
1.
Unfold the tent canvas and unzip all zips
2.
Place the canvas over the poles: the broad side on
the sides and the narrow side with the clips (for the
handlebar) at the side of the handlebar. Make sure
the poles are placed correctly in the sleeves of the
canvas
3.
Pull the canvas downwards and close all zips
4.
Feed the ends of the tie down straps through the
corners and tighten slightly (A)
5.
Is the tent in place? Tighten all tie down straps so the tent is secure
A
world
"The
kids
and your
right in front of you"
TIP:
Do you often go cycling in the dark? Mount the lights on
the front of the sidebars (see picture). This increases
your visibility and allows the rain tent to fit perfectly on
the box.
Step 3
Opening the windows
Would you like to cycle with open windows? Fold the windows carefully and attach to the
hook on the top of the rain tent using the elastic band.
TIP:
A sunroof is also available for use in combination with the poles of the rain tent
at your feet,

Publicité

loading