Table des Matières
Publicité
5"
1⁵⁄₁₆"
1⅛"
06607000
06310000
5"
Drawing not to scale.
Ce dessin est de ne pas graduer.
Este dibujo es de no escalar.
2
5"
½"
³⁄₁₆"
5"
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Max. flow rate
Hole size in mounting surface
spout
valves
spout adapter pin
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
•
For best results, Hansgrohe recommends
that this unit be installed by a licensed,
professional plumber.
•
Please read over these instructions
thoroughly before beginning installation.
Make sure that you have all tools and supplies
needed to complete the installation.
•
Valves 06607000 and 06310000
require ½" hot and cold supply lines (not
included).
• This valve includes type "K" copper tubing to
connect the hot and cold valves to the spout tee.
If the desired installation is different from that
shown here, the installer may provide his own
copper tubing.
• The finished surface must be installed and made
watertight before installation of this valve.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
10 GPM
1⅜"
1¼"
³⁄₁₆"
1⁹⁄₁₆"
Publicité
Table des Matières
