Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User Guide (English)
Introduction
Box Contents
Party Mix Pro
USB Cable
Power Cable
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit numark.com.
For additional product support, visit numark.com/support.
Setup
Getting Started with VirtualDJ LE
1. Locate the VirtualDJ LE installation card in the box to download and install the software.
2. Use the included USB cable to connect the USB Port on Party Mix Pro to an available USB port
on your computer.
3. Connect output devices (headphones, additional speakers, etc.) to Party Mix Pro.
4. Use the included power cable to connect the Power Cable Input to a power outlet, and then
power on Party Mix Pro.
5. Connect any additional input sources by using an 1/8" (3.5 mm) stereo aux cable connected to
the Aux Input, or by wirelessly connecting via Bluetooth. See
Device
for more information on how to connect your Bluetooth device.
6. Open VirtualDJ LE and start DJ'ing! See
Mix Pro
for more information on how to mix tracks.
Note: Visit
virtualdj.com
Connection Diagram
Bluetooth or
Aux Device
Microphone
Operation > Beat-Matching and Mixing with Party
to learn more about how to use the VirtualDJ LE.
Software Download Card
User Guide
Safety & Warranty Manual
Operation > Pairing a Bluetooth
Headphones
Power
Computer
3
Publicité
Table des Matières
