LaserLiner PowerCheck Mode D'emploi page 6

Completely read through the operating instructions, the
„Warranty and Additional Information" booklet as well as
!
the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
This document must be kept in a safe place and passed
on together with the device.
Function / Application
The PowerCheck tester is used to check all commonly used batteries
as well as high-performance rechargeable batteries (NiMH). The
battery condition is shown on an easy-to-read, 3-colour LCD scale.
1b
1a
3a
06
EN
1
2b
2a
4
5
1a
1b
2
2a
2b
3b
3
3a
3b
4
5
Pull-out battery holder:
Round cells:
1.5V battery:
Alkaline manganese /
Zinc carbon
1.2V rechargeable battery:
NiMH
Button cells: (large)
3.0V battery:
Lithium manganese
Negative pole, battery holder
Positive pole, battery holder
Pull-out battery holder:
Button cells: (small)
1.5V battery:
Alkaline manganese
3.0V battery:
Lithium manganese
Negative pole, battery holder
Positive pole, battery holder
Battery holder:
Flat cells:
9.0V battery:
Alkaline manganese /
Zinc carbon
8.4V rechargeable battery:
NiMH
Negative pole, battery holder
Positive pole, battery holder
Battery type setting
3-colour LCD scale
green: good
orange: weak
red: replace