Table Des Matières - Stiga T 102 Série Manuel D'utilisation

WARNING!: READ THE INSTRUCTION BOOKLET THOROUGHLY
EN
BEFORE USING THE MACHINE. Keep for future reference.
INDEX
1. GENERAL INFORMATION ........................... 2
2. SAFETY REGULATIONS .............................. 2
3. GETTING TO KNOW THE MACHINE ........... 5
3.1 Description of the machine and planned
use ........................................................ 5
3.2 Safety signs .......................................... 5
3.3 Identification label ................................ 6
3.4 Main components ................................. 6
4. ASSEMBLY ................................................... 7
4.1 Assembly components .......................... 7
4.2 Steering wheel assembly ...................... 7
4.3 Seat assembly ...................................... 8
4.4 Mounting and connecting the battery .... 8
4.5 Mounting the grass catcher supports .... 8
4.6 Removing the grass catcher retaining
pawl ...................................................... 8
4.7 Mounting the rear bumper ..................... 8
4.8 Mounting the grass catcher bag ............ 8
4.9 Mounting the grass catcher tipping levers
.............................................................. 9
4.10 Mounting the side guards of the cutting
device assembly (if any) ........................ 9
4.11 Side discharge chute assembly (for
models with side discharge only) .......... 9
5. CONTROLS.................................................. 9
5.1 Brake pedal ........................................... 9
5.2 Forward gear pedal ............................... 9
5.3 Reverse gear pedal ........................... 10
5.4 Hydrostatic drive release command .... 10
5.5 Key ignition switch ............................... 10
5.6 Throttle command ............................... 10
5.7 Parking brake lever .............................. 11
5.8 Headlights switch .............................. 11
5.9 Cutting device engage and disengage
functions ............................................. 11
5.10 Enable reverse gear cutting button ...... 12
5.11 Controls for adjusting the cutting unit
assembly height .................................. 12
5.12 Speed cruise control ......................... 12
5.13 Counter (if fitted) ................................. 12
5.14 Auxiliary socket for accessories .......... 13
5.15 Grass catcher tipping command ......... 13
5.16 Type "I" display and buzzers ................ 13
5.17 Type "II" display and buzzers ............... 13
6. USING THE MACHINE ............................... 16
6.1 Preparation ......................................... 16
6.2 Safety checks ...................................... 17
6.3 Using on slopes .................................. 17
6.4 Start-up ............................................... 18
6.5 Operation ............................................ 18
6.6 Stop .................................................... 20
6.7 After operation .................................... 20
7. ROUTINE MAINTENANCE ........................ 20
7.1 General information ............................. 20
7.2 Refuelling / emptying the fuel tank....... 21
7.3 Check, top up, draining of engine oil ... 21
7.4 Anti-scalping wheels ........................... 22
7.5 Battery ................................................ 22
7.6 Cleaning .............................................. 22
7.7 Nuts and bolts ..................................... 23
8. EXTRAORDINARY MAINTENANCE .......... 23
8.1 Safety recommendations .................... 23
8.2 Cutting device assembly ..................... 23
8.3 Replacing front / rear wheels ............... 24
8.4 Electronic circuit board ........................ 25
8.5 Replacing a fuse ................................. 25
8.6 Replacing bulbs .................................. 25
8.7 Rear drive unit ..................................... 25
8.8 Front drive unit (4WD model) .............. 26
8.9 Regulating the grass catcher retaining
pawl spring .......................................... 26
9. STORAGE .................................................. 26
10. HANDLING AND TRANSPORTATION ....... 26
11. ASSISTANCE AND REPAIRS ..................... 26
12. W ARRANTY COVERAGE .......................... 27
13. MAINTENANCE TABLE .............................. 28
14. PROBLEM IDENTIFICATION ..................... 29
15. ATTACHMENTS ......................................... 31
EN - 1