Description Of Functions; Function Of The Access Control System - Häfele WT 210 Instructions De Montage Et De Maintenance

5. Description of functions

5.1 Function of the
access control
system
32
The WT 210 / WT 210 BLE has a radio interface, via which the terminal can be
configured and audit trails read out with the aid of the MDU (not verified by UL).
WT 210 / WT 210 BLE wall terminal
1
Fig. 2: WT 210 / WT 210 BLE for flush mounting
1 Front view
2 Rear view
The access control system consists of the WT 210 / WT 210 BLE wall terminal with
an external power supply and a connected electrical or electro-mechanical opening
device and the configuration software.
An ALVY/APHV UL-listed power supply must be used for UL conformity.
The settings of the WT 210 / WT 210 BLE which are made in the configuration
software are transmitted to the WT 210 / WT 210 BLE by the MDU 110 mobile data
transfer unit.
Audit trails are also read out of the WT 210 / WT 210 BLE by the MDU 110 so that
they can be loaded into the software of the administrator PC and processed. The
MDU 110 has not been evaluated by UL.
Other components such a door release button can also be connected to the
WT 210 / WT 210 BLE.
Amongst other things, the following installation versions are possible:
Installation version 1 (low security requirements)
• A door with a WT 210 / WT 210 BLE, electric opening device and internal door
opener push button.
See chapter "5.4.1 Installation version 1 (low security requirements)" on page 34.
UL 294e7 Performance Level
Model/Feature Line Security
WT 210 BLE
Destructive
Attack
I I
2
Endurance Standby Power
IV I