Environmental Protection - Häfele WT 210 Instructions De Montage Et De Maintenance

Masquer les pouces Voir aussi pour WT 210:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

2.8 Environmental
protection
Installation and start-up personnel
Installation and initial start-up may only be carried out by trained experts. Knowledge
of the following is a prerequisite:
• National accident prevention regulations
• National fire prevention regulations
• Expert electro-technical knowledge
If the installation and start-up personnel do not have these qualifications, a specialist
installation company must be commissioned to do the work.
Personnel who are being trained may only install and start up the product under
supervision or after being authorised to do so by someone with experience.
The operator and the installer are personally responsible for compliance with the
VDE regulations (and the national electrotechnical and electronics regulations).
Unauthorised persons
WARNING
Danger to life for unauthorised persons due to hazards in the danger
zone and working area!
Unauthorised persons who do not meet the requirements described herein
will not be aware of the occupational hazards. Therefore, unauthorised
persons are subject to risks of serious injury or death.
• Keep unauthorised persons away from the danger zone and working
area.
• When in doubt, approach persons and have them clear the danger
zone and working area.
• Interrupt the work until unauthorised persons have left the danger zone
and working area.
NOTE
Risk to the environment due to improper handling of environmentally
hazardous substances!
Improper handling of environmentally hazardous substances, particularly
improper disposal, can cause significant damage to the environment.
• Always follow the notes below for handling environmentally hazardous
substances and their disposal.
• If environmentally hazardous substances are accidentally released
into the environment, immediately take appropriate action. When in
doubt, notify the appropriate local authority of the damage and check
for appropriate measures to be taken.
The following environmentally hazardous substances are used:
Electric and electronic components
Electric and electronic components may contain toxic materials. These components
must be collected separately and be deposited at municipal collection points or
disposed of by a specialist company.
29

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wt 210 ble

Table des Matières