Electrical Specifications; Mechanical Specifications - ADVANSEA MULTI S400 Manuel Utilisateur

Battery voltage:

Electrical specifications

Buzzer output
(green wire):
NMEA 0183:
Communication
bus:
Power supply:

Mechanical specifications

Overall
dimensions
Environment
Operating
temperature
Storage
temperature
Measurement range: from 10.0V to 16.5V
Accuracy: ±0.2V
Resolution: 0.1V
Switched to ground, open collector, 30 V DC and 300 mA max.
It is recommended to protect this output with a 300 mA fuse.
Version 3.01, asynchronous 4800 baud, 8 bit link, without
parity, 1 stop bit. The electrical levels used on the NMEA output
are referenced to the ground and vary according to the system's
voltage supply.
On powering on, a proprietary NMEA frame $PNKEV,
V0.10*4A
is sent to identify the transmitter.
Half-Duplex 38400 baud link on one wire. Words are sent on 8
bits, without parity with 1 stop bit. The number of devices
connected to the bus is limited to 20.
9 volts to 16.5 volts / Consumption <150m
Unit size 112mm x 112mm depth 28mm
Mounting on flat wall by means of a threaded drum of diameter
49mm, step 1.5mm and length 35mm and a plastic nut diameter
80 mm
IP66 Front panel
IP40 rear panel
From -10°C to +50°C
From -20°C to +60°C
Installation and Operation Manual S400 series
MULTI
6