Installation; Introduction; Mounting; Mounting Considerations - RISCO Group Wireless WatchOUT WL T312 Manuel D'installation

Introduction

RISCO Group's WL T312 is a unique detector with signal processing based on two Passive
Infrared (PIR) channels. The WL T312 has an adjustable detection range. The detector is
compatible with all RISCO Group Wireless and Hybrid systems.
The following instructions describe the installation of the WL T312.

Mounting

Mounting Considerations

1. Installation Height: 0.8m - 1.2m
Typical Installation Height: 1m (3'3")
2. To ensure maximum operational reliability, install the detector perpendicular to the ground so
that the upper detection area is parallel to the ground.
3. For optimum detection,
select a location that is likely
to intercept an intruder
moving across the coverage
pattern.
4. Avoid pointing the detector to moving
objects (swaying trees, bushes etc.)
4

Installation

(2'8" – 3'11")
With moving objects
keep distance of
minimum 5 meters (16')
5. Ensure any objects do not obstruct the field
of view. Pay attention to growing trees or
bushes, plants with big moving leaves etc.
Installation Manual
5m (16')
Detection Range
Out of