Control Panel And Features - Whirlpool WGD8000DW Guide D'utilisation Et D'entretien

Control Panel and Features

Not all features and cycles are available on all models.
STEAM MODELS
1
NOTE: The control panel features a sensitive surface that responds to a light touch of your finger.
To ensure your selections are registered, touch the control panel with your finger tip, not your
fingernail. When selecting a setting or option, simply touch its name.
NON-STEAM MODELS
1
POWER
1
Touch to turn the dryer on and off. Touch to stop/cancel
a cycle at any time.
WHAT TO DRY/HOW TO DRY
2
First select a cycle from the "What to Dry" (Automatic
cycles) and then select the "How to Dry" to get the best
combination cycle available for the type of items you are
going to dry. See "Cycle Guide" for cycle details.
3 START/PAUSE
Touch and hold until the LED comes on to start a cycle,
or touch once while a cycle is in process to pause it.
4
LED DISPLAY
When you select a cycle, its default settings will light up
and the Estimated Time Remaining (for Automatic Cycles)
will vary depending on "What to Dry" and "How to Dry"
selections or actual time remaining for Timed Dry cycles
(for Manual Cycles) will be displayed.
6
6
2
4
2
4
5 MODIFIERS
Use to select available modifiers for your dryer. Not all
cycles and options are available on all models.
Temperature
When using Timed Dry Cycle, you may select a dry
temperature based on the type of load you are drying.
Use the warmest setting safe for the garments in the
load. Follow garment label instructions.
NOTE: Automatic Cycles will give you up to
3 temperatures to adjust and it varies, depending
on the "What to Dry" or "How to Dry" selections that
have been made.
Dryness
You may adjust the Dryness on Automatic Cycles
(except for the Sanitize cycle), if desired.
NOTE: Dryness is for use with Automatic Cycles only.
+\- Timed Dry Adjust
Touch "+" or "–" with Timed Dry cycle to increase or
decrease the length of the cycle.
5 6
5 6
3
3
5