Operation; Function Of Displays; Function Of Buttons - SKF TIH 100m Mode D'emploi

5

OPERATION

5.1

Function of displays

• "The remote control display shows the selected
time or temperature for heating.
• "The power LED's show the selected power
setting.
Display Indication
t time in minutes
°C temperature in degrees Celcius
°F temperature in degrees Fahrenheit
5.2

Function of buttons

Button Function
POWER Press to adjust the power. The selected power is indicated with an LED.
MODE Press to switch between TIME MODE and TEMP MODE.
UP (+) Press to increase the value shown on the remote control display.
DOWN(-) Press to decrease the value shown on the remote control display
START / STOP Press to start or stop the heater. The LED on the START/ STOP button is
lit when the heater is heating and flashes during temperature
measurement.
12 SKF TIH 100m