After Use - Beurer ELLE HDE 40 Mode D'emploi

• Depending on the switch setting and duration
of use, the volume diffuser [1], professional
nozzle [9] and hair dryer can become very hot
– burn and fire hazard!
• Do not touch the volume diffuser [1] and the
professional nozzle [9].
• Let the volume diffuser [1] and professional
nozzle [9] cool down first before you remove
them.
• Place the hair dryer only on a non combusti-
ble surface.
• Ensure that there are no highly flammable
liquids in the vicinity of the unit.
• Do not use the unit on artificial hair – fire
hazard!
• Ensure that no hair can be directly sucked in.
note
After switching on the unit for the first time, a
light odour develops for the first minutes. This
is normal and not hazardous to your health. Let
the unit run for three to five minutes. Then you
can use the unit normally.
• If the unit becomes overheated, it switches off
automatically for your safety.
• Remove the plug from the socket and let the
unit cool down.
• Before switching the unit on again, check the
air outlet [2] and the filter [3] for blockage (e.g.
sucked-in lint, dust, hair).
• Switch on the hair dryer with fan and tempera-
ture button:
Gentle airflow
Strong airflow
• Select the heat level:
Low temperature
Medium temperature
High temperature
• Dry and/or style your hair as you wish.
after each use/at each break, always switch off
the hair dryer at the fan switch [6] (setting 0).
Cold air setting
Function
accessories
The following attachments are provided:
• Volume diffuser [1]: Gives the hairstyle volume
and vitality.
• Professional nozzle [9]: Enables targeted and
precise styling and shaping.

after use

• Remove the plug from the socket after each
use.
• Let the unit cool down.
• Do not wind the mains cable around the unit!
• Store the unit in a dry place that is out of
reach of children.
• The unit can be hung on a hook by the han-
ging eyelet [7].
13
Description
The cold level offers the
perfect styling finish. It
cools down your hair and
holds it in place for a better
result.
You can enable the cold
level at any time by holding
down the button. As soon
as you release the button,
the previously selected heat
level returns.